The first launches of SQUID: Spring and RID testing

Yesterday the rocket interface disc, RID, finally arrived. This is the piece that actually mounts the free-flying unit, FFU, to the rocket. The custom made wave spring that will eject the FFU arrived a couple of weeks ago, and now we could finally mate them together.

The rocket interface disc (RID) with the ejection spring

However it soon became apparent that the spring had a tighter fit in the spring gully than we had expected, and to determine whether this would affect the ejection or not me and Mikko carried out some spring testing.

Soon half of the team had gathered around to watch and help out as we covered a sturdy table down in the workshop with foam and devised a clever way of holding the bottom plate of the FFU down against the spring. An unlucky Mario was selected sit under the table and cut a rope going down through a hole in the bottom plate and rid, and down through the table where it was hooked up to a tightening mechanism. To document the ejection we borrowed a Casio high-speed camera from the department of mechanics.

We did two “launches” today, and while the launches weren’t as straight as they could have been the results seem positive, especially since the weighted-down bottom plate was not perfectly balanced. However, since the radius of the spring is slightly lower than expected the very top part of it easily gets jammed between the bottom plate of the FFU and the RID. More testing will be done soon, but until then enjoy the fancy high-speed videos! Sorry for not having turned them right way up, but this would decrease the video quality.

The flickering is due to the flourescent lighting in the room,  and the towel in the first video was an attempt at catching the falling plate. 🙂

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: